==============================================================

Dot-Commands for esxDOS and MB03+ Ulltimate interface
-----------------------------------------------------
 are simple tools for reporting the status of a peripheral
 and also for switching its basing settings

 MB-DOT-CMDs were prepared with and for the ZXDIR.ROM,
 a smart ZXROM for active esxDOS users (esxdos.samcoupe.cz).

 TO-DO:
  - complete check of parameters, incl. "bad value" reporting
  - 64KB ROM support in MBROM

 Asm sources for LnxAssembler (www.ilnx.cz) are included.

==============================================================


.MBDMA v0.2  Z80-DMA Chip Switcher
---------------------------------- 
usage: MBDMA to switch, MBDMA 1 to set on, MBDMA 0 for off


.MBJOY v0.2  Kempston Joystick Switcher
---------------------------------------
usage: MBJOY to switch, MBJOY 1 to set on, MBJOY 0 for off


.MBROM v0.1  CustomROM Control
------------------------------
usage: MBROM     ... reports only (64KB +3 ROMs as no.A and B)
       MBROM 0   ... switches any CustomROM off
       MBROM n   ... switches the 16KB CustomROM n on, n=[1..8]


.MBRTC v0.1  RTC Chip Control
-----------------------------
usage: MBRTC                  ... reports date and time
       MBRTC dDDMMYY          ... sets date, d=[MTWHFAS] 
                                  Mon/Tue/Wed/tHu/Fri/sAt/Sun
       MBRTC mHHMMSS          ... sets time, m=[AP] AM/PM


.MBSAA v0.2  SAA1099 Sound Chip Switcher
----------------------------------------
Usage: MBSAA to switch, MBSAA 1 to set on, MBSAA 0 for off


.MBTMX v0.2  Timex Graphics Switcher
------------------------------------
Usage: MBTMX to switch, MBTMX 1 to set on, MBTMX 0 for off


.MBULA v0.2  Palette of ULA+ Switcher
-------------------------------------
Usage: MBULA to switch, MBULA 1 to set on, MBULA 0 for off

